HAMMER XP-1K is a high performance single component water resistant adhesive system based on the latest modified PVOH resin technology used in water resistant adhesives. It is ideal for wood working process in cold press and manual press applications.

Features & Benefits

Usage

Other Info

• Water resistant adhesive.
  High performance, non toxic, non hazardous adhesive.
  Single component adhesive system.
  Water based adhesive - environmentally friendly (eco friendly)/easy clean up.

• HAMMER XP-1K is suitable for bonding wood, HDF, MDF, plywood, laminates, block board, particle board, veneer, hard board to each other. It can also be used in cold press and manual press application for bonding laminates and veneer. XP-1K gives good adhesion power and water resistence.

• Precautions
  

  To ensure safe storage of product, containers should be well sealed to prevent evaporation of water and the formation of skin on the surface. The emulsion must be stored at a temperature above freezing. Higher temperatures will affect quality and cause the formation of crusts and skins, especially if the containers are not tightly closed or subjected to direct sunlight for long periods.

  General Instructions/Precautions for Uses:
  
  Store away from direct heat & sunlight.
  Skin formation if any, should be removed before use.
  Water should not be added for dilution as it may adversely affect the performance of the product.
  Stir the content of the container well before use.
  All surfaces must be clean, dry and free from grease, dust, oil etc.
  
  Shelf Life
  12 months from the date of manufacture in original sealed & unopened containers.
  
  Packing
  200 Kg in Blue Barrels.
  50 Kg in Blue HDPE Drums.
  20 Kg in White Buckets.