Wood Adhesives > Marine Adhesives
HAMMER POWER is a high performance One-component adhesive based on water dispersion of polyvinyl acetate and enriching additives suitable where moderate water resistance is required. It is ideal for wood working process in hot press/cold press/vacuum press applications. The joint achieves very high strength in a short time and offers very good adhesion to wooden surfaces. After reaching full strength, the joint has very good adhesion to wood surfaces subjected to static and dynamic loads and ensures good initial adhesion.
HAMMER POWER is suitable for bonding wood, HDF, MDF, plywood, laminates, block board, particle board, veneer, hard board to each other. It can be used in hot press and vaccum press for bonding laminates and veneer. It can also be used in cold press and manual press application. POWER gives strong adhesion power and high water resistence.
for use in hot press, for bonding veneer & laminate to particle boards & MDF.
bonding other wood based materials.
for use in cold press and manual bonding application.
general wood working/joinery adhesive.
To ensure safe storage of product, containers should be well sealed to prevent evaporation of water and the formation of skin on the surface. The emulsion must be stored at a temperature above freezing. Higher temperatures will affect quality and cause the formation of crusts and skins, especially if the containers are not tightly closed or subjected to direct sunlight for long periods.
General Instructions/Precautions for Uses: