Wood Adhesives > Premium White Adhesives
HAMMER SH is a high performance One-component adhesive based on water dispersion of polyvinyl acetate and enriching additives. It is a high strength synthetic resin adhesive suitable for most indoor wood applications and most wood joinery purposes. Used in furniture and wood industry for assembling, laminating of panel boards, wood, laminate, veneer etc. The joint achieves very high strength in moderate time and offers very good adhesion to wooden surfaces. After reaching full strength, the joint has very good adhesion to wood surfaces subjected to static and dynamic loads and ensures good initial adhesion. SH can be used in cold press, vacuum press and manual press bonding applications.
HAMMER SH is suitable for bonding wood, HDF, MDF, plywood, laminates, block board, particle board, veneer, hard board to each other. It can also be used in cold press and manual press application for bonding laminates and veneer. SH gives good adhesion power.
Joining wood to wood.
Joining ply to wood.
Joining decorative laminates.
Joining wood in furniture manufacturing.
Bonding particle board.
It can be used for horizontal and vertical lamination.
It has uses in several areas other than furniture requiring adhesion like crafts & hobbies, kites.
To ensure safe storage of product, containers should be well sealed to prevent evaporation of water and the formation of skin on the surface. The emulsion must be stored at a temperature above freezing. Higher temperatures will affect quality and cause the formation of crusts and skins, especially if the containers are not tightly closed or subjected to direct sunlight for long periods.
General Instructions/Precautions for Uses:
