Wood Adhesives > Multipurpose Adhesives
HAMMER STAR is a water based, high-strength and single component adhesive, with floating properties making it especially suitable for gluing of tongue and groove in laminate and other wooden floors. The adhesive is also very suitable as a multipurpose wood glue where high water resistance is required. STAR is based on the latest modified PVOH & vinyl acetate copolymer acrylic dispersion. The joint after achieving full strength, offers very good adhesion to wooden surfaces subjected to static and dynamic load and ensures good initial adhesion. STAR is a high performance heat & water resistant adhesive suitable for exceptional fast drying and vertical lamination. Improvement of the heat and water resistance by pressing at high temperatures (+70°C).
Multipurpose heat & water resistant adhesive with fast setting time.
High performance, non toxic, non hazardous adhesive.
Single component adhesive system.
Excellent rate of bond strength development.
Normal to High Viscosity Product.
Low timber staining characteristics - will not stain.
Water based adhesive - environmentally friendly (eco friendly)/easy clean up.
HAMMER STAR is suitable for all bonding that need a high water resistance. It is suitable for bonding of tropical wood, sandwich panels, finger joint, edge bonding, edge banding, other porous substrates etc. Typical applications are windows and doors. HAMMER STAR is designed and developed for bonding various substrates like PVC, WPVC, Wood, Laminates, Acrylic, HDF, MDF, Alluminium, Metal Sheet, PVC Foils, Prelam and other porous surfaces such as plywood, flush doors, block board, particle board etc. and many other substrates.
Specially formulated adhesive for PVC / Acrylic Laminates
bonding solid wood for production of interior joinery.
bonding solid wood for wooden doors.
for use in hot press, for bonding veneer & laminate to particle boards & MDF.
bonding particle boards and fibre boards.
bonding other wood based materials.
for use in cold press and manual bonding application.
bonding soft wood.
bonding hard wood.
bonding floor panels.
bonding plywood.
General wood working/joinery adhesive.
General Assembly line work.
To ensure safe storage of product, containers should be well sealed to prevent evaporation of water and the formation of skin on the surface. The emulsion must be stored at a temperature above freezing. Higher temperatures will affect quality and cause the formation of crusts and skins, especially if the containers are not tightly closed or subjected to direct sunlight for long periods.
General Instructions/Precautions for Uses:
Store away from direct heat & sunlight.
Skin formation if any, should be removed before use.
Water should not be added for dilution as it may adversely affect the performance of the product.
Stir the content of the container well before use.
All surfaces must be clean, dry and free from grease, dust, oil etc.