Wood Adhesives > New Generation Adhesives
HAMMER EDGE 707 is very strong and high performance one component solvent free water borne Poly Vinyl Copolymer Dispersion adhesive system used for finger joint and edge bonding applications. EDGE 707 is a new generation adhesive specially developed with the latest modified hybrid resin technology enriching with special additives. After reaching full strength, the joint has a very good adhesion to wood surface and offers good initial adhesion.
EDGE 707 can be used in finger jointing, edge bonding and laminating wood on wood applications. EDGE 707 can be used for solid wood bonding especially for Sag Wood Doors. It can also be used in side seaming bonding (Metered Butt Joint). EDGE 707 is suitable for cold press, hot press, roller press, vacuum press and HF press applications.
To ensure safe storage of product, containers should be well sealed to prevent evaporation of water and the formation of skin on the surface. The emulsion must be stored at a temperature above freezing. Higher temperatures will affect quality and cause the formation of crusts and skins, especially if the containers are not tightly closed or subjected to direct sunlight for long periods.
General Instructions/Precautions for Uses:
Store away from direct heat & sunlight.
Skin formation if any, should be removed before use.
Water should not be added for dilution as it may adversely affect the performance of the product.
Stir the content of the container well before use.
All surfaces must be clean, dry and free from grease, dust, oil etc.